Polarized Light Microscopy (PLM)

L&R has trained and experienced staff along with the necessary instrumentation to provide quality asbestos analysis. We offer analysis in the following mediums:

• Air
• Bulk Building Materials
• Settled Dust
• Other Non-Building Materials
• Soil, Sediment, and Vermiculite
• Water and Other Aqueous Samples 

We offer various methodologies (NIOSH, EPA, OSHA, ASTM, etc.) utilizing Phase Contrast Microscopy (PCM) and Polarized Light Microscopy (PLM).

More Information About Asbestos

Asbestos is a group of six naturally occurring fibrous silicate minerals. The six forms of asbestos are: Actinolite, Amosite, Anthophyllite, Chrysotile, Crocidolite, and Tremolite. Asbestos fibers are strong and flexible enough to be spun and woven. They are heat and chemical resistant, making them useful for many industrial purposes. Due to these properties asbestos has been used in over 3,000 different products. Asbestos was a valuable reinforcing, insulating, and fire-proofing material, and was used widely in construction materials.

Asbestos is commonly found in older homes and buildings within the following materials:
• pipe and furnace insulation
• roofing materials
• exterior siding
• wallboard and textures/joint compound
• textured paints and other coatings
• flooring materials and adhesives
• loose attic insulation, known as vermiculite

While many asbestos-containing materials have been banned in the United States, it continues to be used today making it necessary to test modern buildings for the presence of asbestos. Testing of building materials and vermiculite is the only way to determine if the materials contain asbestos fibers. It is the responsibility of anyone who launches a renovation, demolition, or maintenance project that results in structural disturbance. The following are some of the materials in which the use of asbestos is not banned:

• Vinyl floor tile
• Roofing felt
• Roof coatings
• Non-roofing coatings
• Millboard
• Cement shingle
• Cement pipe
• Cement corrugated sheet
• Cement flat sheet
• Pipeline wrap
• Automatic transmission components
• Clutch facings
• Friction materials
• Disk brake pads
• Drum brake linings
• Brake blocks
• Gaskets
• Clothing

If asbestos-containing materials are disturbed by cutting, sanding or other remodeling activities, asbestos fibers can be released to the air where they can become an inhalation hazard. To be a significant health concern, asbestos fibers must be inhaled at high concentrations over an extended timeframe. Significant exposure to asbestos increases the risk of asbestosis or mesothelioma.

Asbestosis is scarring of the lung tissue. It restricts breathing leading to decreased lung volume and increased resistance in the airways. It is a slowly progressive disease with a latency period of 15 to 30 years.

Mesothelioma is a cancer of the pleural lining and is considered to be exclusively related to asbestos exposure. By the time it is diagnosed, it is almost always fatal. Mesothelioma has a longer latency period of 30 to 40 years. 

Please Contact us to disucss your Covid-19 Rapid Test Kit Needs


The L&R Group
Mailing Address

680 S Progress Avenue 
Suite 2A
Meridian, ID 83642
Phone: (208) 813-7700
Fax: (208) 922-2804